In physics, space is the framework in which objects, fields, distances, directions, and physical events are located. There is no single universal classification; space is classified differently according to geometry, dimensionality, topology, physical theory, symmetry, and scale.
Type, Description
Zero-dimensional space (0D): A single point with no length, width, or height
One-dimensional space (1D): Has only one coordinate, such as a line
Two-dimensional space (2D): Has two coordinates, such as a plane or surface
Three-dimensional space (3D): Ordinary physical space with length, width, and height
Four-dimensional spacetime (3+1D): Three spatial dimensions plus one time dimension
Higher-dimensional space: Contains more than three spatial dimensions
Compactified dimensions: Extra dimensions curled into extremely small scales
Infinite-dimensional space: Used in quantum mechanics, field theory, and functional analysis
A flat space governed by ordinary Euclidean geometry.
Characteristics:
Parallel lines remain parallel.
The angles of a triangle add to (180^\circ).
The shortest path between two points is a straight line.
The Pythagorean theorem applies.
Examples:
(\mathbb{R}): one-dimensional real line
(\mathbb{R}^2): Euclidean plane
(\mathbb{R}^3): ordinary three-dimensional Euclidean space
Space in which Euclidean geometry does not apply globally.
1. Spherical or positively curved space
Positive curvature
Triangle angles add to more than (180^\circ)
Initially parallel paths may converge
A sphere’s surface is a two-dimensional example
2. Hyperbolic or negatively curved space
Negative curvature
Triangle angles add to less than (180^\circ)
Initially parallel paths tend to diverge
3. Flat space
Zero curvature
Locally or globally Euclidean
Often used as an approximation when gravitational effects are negligible
Type, Curvature, Typical geometry
Positively curved space: (K>0) Spherical geometry
Flat space: (K=0) Euclidean geometry
Negatively curved space: (K<0) Hyperbolic geometry
Variably curved space: Curvature changes by location, General-relativistic space
In general relativity, curvature may vary continuously because of matter, energy, pressure, and momentum.
Three-dimensional
Euclidean
Absolute and fixed
Independent of matter and time
The same for all observers
The spatial framework of classical mechanics under Galilean transformations.
Time is absolute.
Lengths are unchanged between inertial observers.
Velocities transform by ordinary addition.
The framework of special relativity.
Combines space and time
Four-dimensional
Flat spacetime
Observer measurements of space and time depend on relative motion
The spacetime interval remains invariant
The framework of general relativity.
Gravity is represented by spacetime curvature.
Geometry is dynamical.
Matter and energy affect curvature.
Curvature controls the motion of matter and radiation.
Space considered at quantum or Planck-scale regimes.
Possible characteristics include:
Quantum fluctuations
Noncommuting coordinates
Minimum measurable length
Discrete geometric quantities
Superpositions of geometries
A complete experimentally confirmed theory of quantum space has not yet been established.
Topology describes the global connectedness and continuity of space, independently of exact distances and angles.
Every closed loop can be continuously contracted to a point.
Examples:
Infinite Euclidean plane
Surface of a sphere
Some closed loops cannot be contracted to a point.
Examples:
Torus
Cylindrical space
Space containing holes or handles
Space without a boundary in the relevant mathematical description.
Finite space with no boundary, such as the surface of a sphere.
Contained within a finite region.
Extends indefinitely.
Any two regions can be joined by a continuous path.
Contains separate components that cannot be joined by continuous paths within the space.
Type, Description
Finite space
Has a finite total spatial volume
Infinite space
Extends without limit
Semi-infinite space
Bounded in one direction but unbounded in another
Compact space
Finite in extent and mathematically closed and bounded
Noncompact space
Not compact; it may extend indefinitely
Periodic space
Opposite boundaries are identified, producing repeated spatial structure
A space can be finite but without an edge, as illustrated by the two-dimensional surface of a sphere.
Coordinates vary continuously.
Between any two positions, intermediate positions exist.
Used in classical mechanics and general relativity.
Space consists of elementary points, cells, nodes, or quantum units.
Appears in lattice models and some quantum-gravity theories.
Spatial area or volume may occur in discrete quantum values.
Investigated in approaches such as loop quantum gravity.
May possess a noninteger effective dimension.
Shows scale-dependent or self-similar structure.
Space has the same physical properties at every location.
Physical or geometric properties vary with position.
Space has the same properties in every direction.
Properties depend on direction.
This produces four principal combinations:
Homogeneous and isotropic
Homogeneous but anisotropic
Inhomogeneous but locally isotropic
Inhomogeneous and anisotropic
Large-scale cosmological models often approximate the universe as spatially homogeneous and isotropic.
Uses coordinates: [ (x,y,z) ]
Uses radial distance and angle: [ (r,\theta) ]
C. Cylindrical space
Uses: [ (r,\phi,z) ]
Uses coordinates adapted to curved surfaces or physical symmetries.
Used in cosmology to describe positions that expand with the universe.
Represents physically measured distances at a specified time.
Coordinates describe space but should not be confused with the space itself.
A space equipped with a distance function.
A space defined through continuity, neighbourhoods, and open sets.
A collection of vectors supporting addition and scalar multiplication.
Similar to vector space but without a preferred origin.
An inner-product vector space used to represent quantum states.
Represents all possible positions or configurations of a physical system.
For (N) particles in ordinary three-dimensional space, the configuration space generally has (3N) dimensions.
Represents both positions and momenta.
For (N) classical particles, phase space generally has (6N) dimensions.
A space whose coordinates represent momentum components rather than position.
Used in crystallography and condensed-matter physics to represent spatial periodicity.
A space whose individual points are mathematical functions.
Represents physically distinct solutions or geometrical structures characterized by continuous parameters.
All dimensions have the same positive metric signature.
Commonly used for purely spatial geometry.
The metric contains both positive and negative signs.
Used for relativistic spacetime, where the time dimension differs geometrically from spatial dimensions.
A pseudo-Riemannian structure with one time-like direction and the remaining directions space-like.
Space measured relative to a laboratory frame.
Associated with an observer moving at constant velocity without acceleration.
Associated with accelerating or rotating observers.
The instantaneous three-dimensional space measured by a particular observer.
Coordinates defined relative to a system’s center of mass.
Coordinates attached to matter participating in a common flow, especially cosmic expansion.
Space exists independently of observers and matter.
Associated historically with Newtonian mechanics.
Spatial positions and motions are defined relative to observers or reference bodies.
Space is understood through relationships among physical objects rather than as an independent container.
Geometry is prescribed and is not affected by physical processes.
Geometry evolves and interacts with matter and energy.
General relativity uses dynamical spacetime.
Space is not fundamental but arises from deeper quantum, informational, or relational degrees of freedom.
Approximately associated with the Planck length:
[\ell_{\mathrm P}\approx 1.616\times10^{-35}\ \text{m}]
Quantum-gravitational effects are expected to become important near this scale.
The scale of particles, nuclei, and quantum fields.
The scale of atoms, molecules, and chemical structures.
Intermediate between microscopic and macroscopic scales.
The scale of ordinary objects and laboratories.
The region around planets and planetary systems.
Space between planets.
Space between stars.
Space between galaxies.
The largest-scale spatial structure of the universe.
Type, Description
Vacuum space: Region containing no ordinary macroscopic matter
Matter-filled space: Region occupied by matter
Field-filled space: Region containing gravitational, electromagnetic, or quantum fields
Plasma space: Region dominated by ionized matter
Interplanetary space: Dominated by solar wind and heliospheric magnetic fields
Interstellar space: Contains gas, dust, cosmic rays, radiation, and magnetic fields
Intergalactic space: Low-density region between galaxies
Near-Earth spaceL: Magnetosphere, ionosphere, radiation belts, and surrounding plasma
Deep space: Regions far from Earth or major planetary bodies
A physical vacuum is not necessarily “nothing”; quantum fields can still possess fluctuations and vacuum energy.
Relative to a spacetime event or direction:
Two events are separated such that no signal traveling at or below the speed of light can connect them causally.
One event can causally influence the other through a slower-than-light or light-speed signal.
Events can be connected only by a signal traveling at exactly the speed of light.
These classifications apply primarily to spacetime intervals, not ordinary three-dimensional space alone.
The spatial part of the universe may be modeled as:
Positive spatial curvature
Often finite spatial volume
Spherical-type geometry
Zero spatial curvature
Euclidean geometry on large scales
Negative spatial curvature
Hyperbolic-type geometry
Usually spatially infinite in simple models
The terms open, flat, and closed describe spatial geometry and do not, by themselves, determine the ultimate fate of cosmic expansion.
Notation, Meaning
1+0 dimensions: One spatial dimension and no explicit time dimension
1+1 dimensions: One space and one time dimension
2+1 dimensions: Two space and one time dimension
3+1 dimensions: Three space and one time dimension
4+1 dimensions: Four space and one time dimension
(n+1) dimensions: (n) spatial dimensions and one temporal dimension
Higher-dimensional frameworks appear in Kaluza–Klein theory, string theory, brane models, and other approaches to fundamental physics.
Space may possess:
Translational symmetry — physical laws remain unchanged after spatial displacement.
Rotational symmetry — physical laws remain unchanged after rotation.
Reflection symmetry — invariance under spatial inversion or mirror reflection.
Spherical symmetry — identical structure around a central point.
Cylindrical symmetry — invariance around an axis.
Axial symmetry — rotational symmetry about one axis.
Discrete symmetry — invariance only under selected translations or rotations.
Continuous symmetry — invariance under continuously variable transformations.
Position space
Configuration space
Phase space
Velocity space
Momentum space
Minkowski space
de Sitter space
anti-de Sitter space
Robertson–Walker space
Schwarzschild spacetime
Kerr spacetime
Hilbert space
Fock space
State space
Projective Hilbert space
Quantum configuration space
Quantum phase space
Gauge-orbit space
Reciprocal space
(k)-space
Brillouin-zone space
Crystal-lattice space
Spin space
Band-structure space
Field-configuration space
Internal symmetry space
Gauge space
Parameter space
Moduli space
Space
├── By dimension
│ ├── 0D, 1D, 2D, 3D
│ ├── 3+1 spacetime
│ └── Higher-dimensional
├── By geometry
│ ├── Euclidean
│ ├── Spherical
│ └── Hyperbolic
├── By curvature
│ ├── Positive
│ ├── Zero
│ └── Negative
├── By topology
│ ├── Simply connected
│ ├── Multiply connected
│ ├── Open or closed
│ └── Compact or noncompact
├── By continuity
│ ├── Continuous
│ ├── Discrete
│ ├── Quantized
│ └── Fractal
├── By physical theory
│ ├── Newtonian
│ ├── Galilean
│ ├── Minkowski
│ ├── General-relativistic
│ └── Quantum
├── By structure
│ ├── Metric space
│ ├── Vector space
│ ├── Hilbert space
│ ├── Configuration space
│ ├── Phase space
│ └── Momentum space
├── By properties
│ ├── Homogeneous or inhomogeneous
│ └── Isotropic or anisotropic
├── By dynamical status
│ ├── Absolute
│ ├── Relative
│ ├── Relational
│ ├── Fixed
│ ├── Dynamical
│ └── Emergent
└── By scale
├── Planck
├── Microscopic
├── Macroscopic
├── Planetary
├── Interstellar
├── Intergalactic
└── Cosmological
The most fundamental modern distinction is between ordinary three-dimensional space and four-dimensional spacetime. In relativity, space and time cannot generally be treated as completely independent physical structures.