In Classical Mechanics, the topic “Blocks” commonly appears in force, friction, pulley, incline, collision, and oscillation problems. A structured topic list is:
Block on a Horizontal Surface
Free-body diagram of a block
Weight and normal reaction
Applied horizontal force
Net force and acceleration
Static equilibrium
Dynamic motion
Block on a Rough Horizontal Surface
Static friction
Limiting friction
Kinetic friction
Coefficient of friction
Minimum force required for motion
Acceleration after motion begins
Block on a Smooth Inclined Plane
Resolution of weight into components
Normal force
Acceleration down the incline
Motion up and down an incline
Time of ascent and descent
Block on a Rough Inclined Plane
Friction on an inclined plane
Impending motion
Angle of friction
Angle of repose
Acceleration with friction
Conditions for slipping
Block Pulled at an Angle
Horizontal and vertical components of force
Effect of pulling angle on normal force
Effect on friction
Optimum pulling angle
Acceleration under inclined pulling force
Block Pushed at an Angle
Downward force component
Increased normal reaction
Increased friction
Comparison of pushing and pulling
Two Blocks in Contact
Common acceleration
Contact force
Internal and external forces
Force applied to either block
Newton’s third-law force pairs
Multiple Blocks in Contact
Acceleration of the system
Contact forces between successive blocks
Effective system mass
Force transmission through blocks
One Block on Top of Another
Friction between blocks
No-slip condition
Relative motion
Maximum possible acceleration without slipping
Motion when slipping occurs
Block Connected by a String
String tension
Massless-string approximation
Inextensible-string constraint
Equal or related accelerations
Equations of motion
Blocks Connected over a Pulley
Atwood-machine configurations
Tension in the string
Acceleration of blocks
Unequal masses
Pulley constraints
Block on a Table Connected to a Hanging Block
Horizontal and vertical equations of motion
Tension
Friction on the table
System acceleration
Equilibrium condition
Blocks on Two Inclined Planes
Blocks connected over a pulley
Components of gravitational force
Friction on either incline
Direction of motion
Acceleration and tension
Wedge-and-Block Systems
Block on a movable wedge
Relative acceleration
Ground-frame analysis
Wedge-frame analysis
Normal reaction
No-separation condition
Block Against a Vertical Wall
Horizontal applied force
Normal reaction from wall
Vertical friction
Minimum force preventing sliding
Acceleration along the wall
Block in an Accelerating Frame
Pseudo force
Block inside an accelerating vehicle
Effective gravity
Equilibrium in a non-inertial frame
Inclined surfaces in accelerating frames
Block in an Elevator
Apparent weight
Upward acceleration
Downward acceleration
Constant-speed motion
Free-fall condition
Block Attached to a Spring
Hooke’s law
Spring force
Equilibrium position
Simple harmonic motion
Angular frequency
Period of oscillation
Two Blocks and Springs
Coupled oscillations
Normal modes
In-phase motion
Out-of-phase motion
Effective spring constants
Block–Spring System with Friction
Damped motion due to dry friction
Energy loss
Successive amplitudes
Stopping condition
Stick-slip motion
Block Collision Problems
Block–block collisions
Elastic collisions
Inelastic collisions
Perfectly inelastic collisions
Momentum conservation
Coefficient of restitution
Bullet–Block Problems
Projectile embedding in a block
Conservation of momentum
Ballistic pendulum
Energy transformation after impact
Block Sliding on a Curved Surface
Normal reaction
Tangential acceleration
Radial acceleration
Loss of contact
Energy conservation
Block on a Rotating Surface
Centripetal force
Friction as centripetal force
Maximum angular speed
Radial slipping
Rotating platforms
Block in Circular Motion
Block inside a circular track
Block outside a circular track
Normal-force variation
Minimum speed for contact
Vertical circular motion
Block and Energy Methods
Work done by gravity
Work done by friction
Work done by applied forces
Work–energy theorem
Conservation of mechanical energy
Block and Momentum Methods
Linear impulse
Change in momentum
Impulsive forces
Collisions between blocks
Center-of-mass motion
Block Equilibrium Problems
Translational equilibrium
Force balance
Frictional equilibrium
Block supported by strings
Block between surfaces
Block with Variable Forces
Position-dependent force
Velocity-dependent force
Time-dependent force
Work from variable forces
Differential equations of motion
Advanced Block Problems
Blocks with movable pulleys
Blocks with massive pulleys
Blocks connected by springs and strings
Constraint-force problems
Lagrangian treatment of block systems
Generalized coordinates
Coupled block dynamics
Stability and small oscillations
These “Block Mechanics” topics mainly fall under Newtonian mechanics, friction, constrained motion, work-energy, momentum, oscillations, and non-inertial frames.